Mineral PropertyThe term "mineral property" means each separate interest you own in each mineral deposit in each separate tract or parcel of land. You can treat two or more separate interests as one property or as separate properties. See section 614 of the Internal Revenue Code and the related regulations for rules on how to treat separate mineral interests. Mineral property includes oil and gas wells, mines, and other natural deposits (including geothermal deposits). There are two ways of figuring depletion on mineral property.
Cost DepletionTo figure cost depletion you must first determine the following.
Basis for depletion. To figure the property's basis for depletion, subtract all the following from the property's adjusted basis.
Adjusted basis. The adjusted basis of your property is your original cost or other basis, plus certain additions and improvements, and minus certain deductions such as depletion allowed or allowable and casualty losses. Your adjusted basis can never be less than zero. See Publication 551, Basis of Assets, for more information on adjusted basis. Total recoverable units. The total recoverable units is the sum of the following.
You must estimate or determine recoverable units (tons, pounds, ounces, barrels, thousands of cubic feet, or other measure) of mineral products using the current industry method and the most accurate and reliable information you can obtain. Number of units sold. You determine the number of units sold during the tax year based on your method of accounting. Use the following table to make this determination.
The number of units sold during the tax year does not include any for which depletion deductions were allowed or allowable in earlier years. Figuring the cost depletion deduction. Once you have figured your property's basis for depletion, the total recoverable units, and the number of units sold during the tax year, you can figure your cost depletion deduction by taking the following steps.
Percentage DepletionTo figure percentage depletion, you multiply a certain percentage, specified for each mineral, by your gross income from the property during the tax year. Gross income. When figuring your percentage depletion, subtract from your gross income from the property the following amounts.
Use the following fraction to figure the part of the bonus you must subtract.
For oil and gas wells and geothermal deposits, gross income from the property is defined later under Oil and Gas Wells. For property other than a geothermal deposit or an oil and gas well, gross income from the property is defined later under Mines and Geothermal Deposits. Taxable income limit. The percentage depletion deduction cannot be more than 50% (100% for oil and gas property) of your taxable income from the property figured without the depletion deduction. Taxable income from the property means gross income from the property minus all allowable deductions (excluding any deduction for depletion) attributable to mining processes, including mining transportation. These deductible items include the following.
The following rules apply when figuring your taxable income from the property for purposes of the taxable income limit.
Oil and Gas WellsGenerally, only independent producers and royalty owners can claim percentage depletion for any oil or gas well. However, if you are not an independent producer or royalty owner, you may be able to claim percentage depletion for the following items.
Independent Producers and Royalty OwnersIf you are an independent producer or royalty owner, you figure percentage depletion using a rate of 15% of the gross income from the property based on your average daily production of domestic crude oil or domestic natural gas up to your depletable oil or natural gas quantity. However, certain refiners and retailers, as explained next, and certain transferees of proven oil and gas properties, as explained later, cannot claim percentage depletion. For information on figuring the deduction, see Figuring percentage depletion, later. Refiners who cannot claim percentage depletion. You cannot claim percentage depletion if you or a related person refine crude oil and you and the related person refined more than 50,000 barrels on any day during the tax year. Related person. You and another person are related persons if either of you holds a significant ownership interest in the other person or if a third person holds a significant ownership interest in both of you. For example, a corporation, partnership, estate, or trust and anyone who holds a significant ownership interest in it are related persons. A partnership and a trust are related persons if one person holds a significant ownership interest in each of them. For purposes of the related person rules, significant ownership interest means direct or indirect ownership of 5% or more in any one of the following.
Any interest owned by or for a corporation, partnership, trust, or estate is considered to be owned directly both by itself and proportionately by its shareholders, partners, or beneficiaries. Retailers who cannot claim percentage depletion. You cannot claim percentage depletion if both the following apply.
For the purpose of determining if this rule applies, do not count the following.
Sales through a related person. You are considered to be selling through a related person if any sale by the related person produces gross income from which you may benefit because of your direct or indirect ownership interest in the person. You are not considered to be selling through a related person who is a retailer if all the following apply.
Transfers. You cannot claim percentage depletion if you received your interest in a proven oil or gas property by transfer after 1974 and before October 12, 1990. For a definition of the term "transfer," see section 1.613A-7(n) of the regulations. Figuring percentage depletion. Generally, as an independent producer or royalty owner, you figure your percentage depletion by computing your average daily production of domestic oil or gas and comparing it to your depletable oil or gas quantity. If your average daily production does not exceed your depletable oil or gas quantity, you figure your percentage depletion by multiplying the gross income from the oil or gas property by 15%. If your average daily production of domestic oil or gas exceeds your depletable oil or gas quantity, you must make an allocation as explained later under Average daily production exceeds depletable quantities. In addition, there is a limit on the percentage depletion deduction. See Taxable income limit, later. Average daily production. Figure your average daily production by dividing your total domestic production for the tax year by the number of days in your tax year. Partial interest. If you have a partial interest in the production from a property, figure your share of the production by multiplying total production from the property by your percentage of interest in the revenues from the property. You have a partial interest in the production from a property if you have a net profits interest in the property. To figure the share of production for your net profits interest, you must determine your percentage participation (as measured by the net profits) in the gross revenue from the property. To figure this percentage, you divide the income you receive for your net profits interest by the gross revenue from the property. Example. John Oak owns oil property in which Paul Elm owns a 20% net profits interest. During the year, the property produced 10,000 barrels of oil, which John sold for $200,000. John had expenses of $90,000 attributable to the property. The property generated a net profit of $110,000 ($200,000 - $90,000). Paul received income of $22,000 ($110,000 × .20) for his net profits interest. Paul determined his percentage participation to be 11% by dividing $22,000 (the income he received) by $200,000 (the gross revenue from the property). Paul determined his share of the oil production to be 1,100 barrels (10,000 barrels × 11%). Depletable oil or natural gas quantity. Generally, your depletable oil quantity is 1,000 barrels. Your depletable natural gas quantity is 6,000 cubic feet multiplied by the number of barrels of your depletable oil quantity that you choose to apply. If you claim depletion on both oil and natural gas, you must reduce your depletable oil quantity by the number of barrels you use to figure your depletable natural gas quantity. If you are involved in marginal production, see section 613A(c) of the Internal Revenue Code to figure your depletable oil or natural gas quantity. Example. You have both oil and natural gas production. To figure your depletable natural gas quantity, you choose to apply 360 barrels of your depletable oil quantity. Your depletable natural gas quantity is 2.16 million cubic feet of gas (360 × 6000). You must reduce your depletable oil quantity to 640 barrels (1000 - 360). You must allocate the depletable oil or gas quantity among the following related persons in proportion to each entity's or family member's production of domestic oil or gas for the year.
Members of the same controlled group of corporations are treated as one taxpayer when figuring the depletable oil or natural gas quantity. They share the depletable quantity. Under this rule, a controlled group of corporations is defined in section 1563(a) of the Internal Revenue Code, except that the stock ownership requirement in that definition is "more than 50%" rather than "at least 80%." Gross income from the property. For purposes of percentage depletion, gross income from the property (in the case of oil and gas wells) is the amount you receive from the sale of the oil or gas in the immediate vicinity of the well. If you do not sell the oil or gas on the property, but manufacture or convert it into a refined product before sale or transport it before sale, the gross income from the property is the representative market or field price (RMFP) of the oil or gas, before conversion or transportation. If you sold gas after you removed it from the premises for a price that is lower than the RMFP, determine gross income from the property for percentage depletion purposes without regard to the RMFP. Gross income from the property does not include lease bonuses, advance royalties, or other amounts payable without regard to production from the property. Average daily production exceeds depletable quantities. If your average daily production for the year is more than your depletable oil or natural gas quantity, figure your allowance for depletion for each domestic oil or natural gas property as follows.
Taxable income limit. If you are an independent producer or royalty owner of oil and gas, your deduction for percentage depletion is limited to the smaller of the following.
Temporary suspension of taxable income limit for marginal production. For tax years beginning after 1997 and before 2002, percentage depletion on the marginal production of oil or natural gas is not limited to taxable income from the property figured without the depletion deduction. For information on marginal production, see section 613A(c)(6) of the Internal Revenue Code. Partnerships and S CorporationsGenerally, each partner or shareholder, and not the partnership or S corporation, figures the depletion allowance separately. (However, see Electing large partnerships must figure depletion allowance, later.) Each partner or shareholder must decide whether to use cost or percentage depletion. If a partner or shareholder uses percentage depletion, he or she must apply the 65%-of-taxable-income limit using his or her taxable income from all sources. Partner's or shareholder's adjusted basis. The partnership or S corporation must allocate to each partner or shareholder his or her share of the adjusted basis of each oil or gas property held by the partnership or S corporation. The partnership or S corporation makes the allocation as of the date it acquires the oil or gas property. Each partner's share of the adjusted basis of the oil or gas property generally is figured according to that partner's interest in partnership capital. However, in some cases, it is figured according to the partner's interest in partnership income. The partnership or S corporation adjusts the partner's or shareholder's share of the adjusted basis of the oil and gas property for any capital expenditures made for the property and for any change in partnership or S corporation interests.
Reporting the deduction. Information that you, as a partner or shareholder, use to figure your depletion deduction on oil and gas properties is reported by the partnership or S corporation on line 25 of Schedule K-1 (Form 1065) or on line 23 of Schedule K-1 (Form 1120S). Deduct oil and gas depletion for your partnership or S corporation interest on Schedule E (Form 1040). The depletion deducted on Schedule E is included in figuring income or loss from rental real estate or royalty properties. The line instructions for Schedule E explain where to report this income or loss and whether you need to file either of the following forms.
Electing large partnerships must figure depletion allowance. For partnership tax years beginning after 1997, an electing large partnership, rather than each partner, generally must figure the depletion allowance. The partnership figures the depletion allowance without taking into account the limits on the amount of production and taxable income. Also, the adjusted basis of a partner's interest in the partnership is not affected by the depletion allowance. An electing large partnership is one that meets both the following requirements.
Disqualified partners. An electing large partnership does not figure the depletion allowance of its disqualified partners. The disqualified partners must figure it themselves, as explained earlier. All the following are disqualified partners.
Natural Gas WellsYou can use percentage depletion for natural gas sold under a fixed contract or produced from geopressured brine. Natural gas sold under a fixed contract. Natural gas sold under a fixed contract qualifies for a percentage depletion rate of 22%. This is domestic natural gas sold by the producer under a contract that does not provide for a price increase to reflect any increase in the seller's tax liability because of the repeal of percentage depletion for gas. The contract must have been in effect from February 1, 1975, until the date of sale of the gas. Price increases after February 1, 1975, are presumed to take the increase in tax liability into account unless demonstrated otherwise by clear and convincing evidence. Natural gas from geopressured brine. Qualified natural gas from geopressured brine is eligible for a percentage depletion rate of 10%. This is natural gas that is both the following.
Mines and Geothermal DepositsCertain mines, wells, and other natural deposits, including geothermal deposits, qualify for percentage depletion. Mines and other natural deposits. For a natural deposit, the percentage of your gross income from the property that you can deduct as depletion depends on the type of deposit. The following is a list of the depletion percentages for the more common minerals.
You can find a complete list of minerals and their percentage depletion rates in section 613(b) of the Internal Revenue Code. Corporate deduction for iron ore and coal. The percentage depletion deduction of a corporation for iron ore and coal (including lignite) is reduced by 20% of:
Gross income from the property. For property other than a geothermal deposit or an oil or gas well, gross income from the property means the gross income from mining. Mining includes all the following.
Excise tax. Gross income from mining includes the separately stated excise tax received by a mine operator from the sale of coal to compensate the operator for the excise tax the mine operator must pay to finance black lung benefits. Extraction. Extracting ores or minerals from the ground includes extraction by mine owners or operators of ores or minerals from the waste or residue of prior mining. This does not apply to extraction from waste or residue of prior mining by the purchaser of the waste or residue or the purchaser of the rights to extract ores or minerals from the waste or residue. Treatment processes. The processes included as mining depend on the ore or mineral mined. To qualify as mining, the treatment processes must be applied by the mine owner or operator. For a listing of treatment processes considered as mining, see section 613(c)(4) of the Internal Revenue Code and the related regulations. Transportation of more than 50 miles. If the IRS finds that the ore or mineral must be transported more than 50 miles to plants or mills to be treated because of physical and other requirements, the additional authorized transportation is considered mining and included in the computation of gross income from mining.
Disposal of coal or iron ore. You cannot take a depletion deduction for coal (including lignite) or iron ore mined in the United States if both the following apply.
Disposal to related person. This rule does not apply if you dispose of the coal or iron ore to one of the following persons.
Geothermal deposits. Geothermal deposits located in the United States or its possessions qualify for a percentage depletion rate of 15%. A geothermal deposit is a geothermal reservoir of natural heat stored in rocks or in a watery liquid or vapor. For percentage depletion purposes, a geothermal deposit is not considered a gas well. Figure gross income from the property for a geothermal steam well in the same way as for oil and gas wells. See Gross income from the property, earlier, under Oil and Gas Wells. Lessor's Gross IncomeA lessor's gross income from the property that qualifies for percentage depletion usually is the total of the royalties received from the lease. However, for oil, gas, or geothermal property, gross income does not include lease bonuses, advanced royalties, or other amounts payable without regard to production from the property. Bonuses and advanced royalties. Bonuses and advanced royalties are payments a lessee makes before production to a lessor for the grant of rights in a lease or for minerals, gas, or oil to be extracted from leased property. If you are the lessor, your income from bonuses and advanced royalties received is subject to an allowance for depletion. Figuring cost or percentage depletion. To figure cost depletion on a bonus, multiply your adjusted basis in the property by a fraction, the numerator of which is the bonus and the denominator of which is the total bonus and royalties expected to be received. To figure cost depletion on advanced royalties, use the computation explained earlier under Cost Depletion, treating the number of units for which the advanced royalty is received as the number of units sold. To figure percentage depletion (for other than gas, oil, or geothermal property), any bonus or advanced royalty payments are part of your gross income from the property. Terminating the lease. If you receive a bonus on a lease that expires, terminates, or is abandoned before you derive any income from the extraction of mineral, include in income for the year of expiration, termination, or abandonment, the depletion deduction you took. Also increase your adjusted basis in the property to restore the depletion deduction you previously subtracted. For advanced royalties, include in income for the year of lease termination, the depletion claimed on minerals for which the advanced royalties were paid if the minerals were not produced before termination. Increase your adjusted basis in the property by the amount you include in income. Delay rentals. These are payments for deferring development of the property. Since delay rentals are ordinary rent, they are ordinary income that is not subject to depletion. These rentals can be avoided by either abandoning the lease, beginning development operations, or obtaining production. |